TRSS-RJ11 Telephone Signal Surge Protector

Short Description:

TRSS-RJ11 telephone lightning protection device is designed in accordance with IEC and international standards. It is mainly used for lightning protection and overvoltage protection of telecommunications data communication signal lines and their equipment (such as telephones, program-controlled switches, fax machines, ADSL, MODEN). It is easy to install and requires no special maintenance.

Product Detail

Product Tags

Product introduction TRSS-RJ11 telephone lightning protection device is designed in accordance with IEC and international standards. It is mainly used for lightning protection and overvoltage protection of telecommunications data communication signal lines and their equipment (such as telephones, program-controlled switches, fax machines, ADSL, MODEN). It is easy to install and requires no special maintenance. 1. This series of signal lightning arresters can be directly installed in series at the front end of the protected equipment (or system). The closer to the protected equipment (or system), the better. 2. The input end (IN) of the OMS-RJ11 interface telephone lightning protection device is connected to the signal line, and the output end (OUT) is connected to the protected equipment, and it cannot be reversed. 3. The PE wire of the lightning protection device must be connected to the ground of the lightning protection system with strict equipotentiality, otherwise it will affect the working performance; in order to achieve a good lightning protection effect, the lightning protection device should be connected with the shortest wire possible. 4. The lightning protection device does not need long-term maintenance when installed under conditions that do not exceed the requirements. It only requires routine maintenance of the system; if there is a problem with signal transmission during use, the signal transmission will return to normal after the lightning protection device is replaced It indicates that the lightning protector is damaged and needs to be repaired or replaced. Product features 1. Large flow capacity, low residual pressure and fast response time; 2. With multiple protections of overvoltage, overcurrent and clamping; 3. Low loss, superior signal transmission performance; 4. Provide line-to-line and line-to-ground full protection mode. 5. Fast response time, less than 10ns; 6. Installation is quick and easy.

  • Previous:

    • Leave Your Message


    Leave Your Message